Hansgrohe Vernis Blend electronic basin mixer without temperature control

Understated hand hygiene: Hansgrohe Vernis Blend electronic basin mixer

With its purist, flat curves, the Hansgrohe Vernis Blend electronic basin mixer is a timeless eye-catcher at the washbasin. Enjoy touch-free hygiene thanks to activation by sensor.

More hygiene and easy cleaning

The subtle infrared sensor of the Vernis Blend electronic basin mixer detects when a person approaches and automatically activates the water flow for a maximum of 30 seconds. The running time can also be adjusted for economical convenience. The advantage is improved hand hygiene, and the surface is protected from unsightly fingerprints. Practical: to ensure that the quality of the drinking water is maintained even when it is not used for a longer period of time, a hygiene flush can be activated that starts the water flow at selectable intervals. The manual water stop also makes cleaning easy.

Product features

• spray mode: normal spray (wide, rich jet)
• with isolated water conduction
• running time of water flow adjustable via motion sensor (maximum 30 seconds)
• soothing full, soft water jet enriched with air (AirPower)
• aerator can be adjusted for optimum jet alignment
• maximum flow rate: 5 l/min
• increased comfort due to smooth operating technology and generous distance between spout and basin (ComfortZone)
• for cold or pre-mixed water
• contactless triggering with infrared electronics (range adjustable)
• suitable for thermal disinfection (maximum 70C)
• hygiene rinsing adjustable to ensure drinking water quality
• manual flow stop for cleaning
• with dirt filters
• with non-return valve
• includes flexible connection hoses

• with external battery compartment (6 V Lithium battery)

Please note

• electrical fittings comply with German standards
• for pre-mixed water as well as scalding protection, please order the thermotat angle valve separately. These can be found in Accessories
• the function may be impaired on washbasins with raised or very wide rims (larger than 75 mm).
• without waste set. Please order waste valve separately This can be found in Accessories

SpecificationsItem number:71504000Series:Vernis BlendMaterial:die-cast zincColour:chromeHeight (mm):112Projection (mm):112Type of fitting:contact-free/electronicType of installation:deck-mountedShape:roundType of connection:high pressureWater activation:by motion sensorWaste set:without waste setAerator:adjustableMax. water consumption of the fitting at 3 bar (l/min):5No. of tap holes:for 1 tap holePower supply:with plugSpout:fixedHandle postion:without handleShippingContains:

fitting, power supply unit

Mode d’emballage:ParcelpdfProduct data sheetpdfTechnical drawingspdfAssembly instructionspdfCare instructions